Tunturi T80 User Manual download pdf (Page 7)

O W N E R ’ S M A N U A L

•

T 8 0 T 8 5

Press the SET key to choose a user code, enter user

details, select display values, and to display the total

training distance in kilometres and the total training

time in hours.

DISpLAYS

HEART RATE

45-220 bpm. The heart rate light always blinks when

the console is receiving a heart rate signal.

KCAL (estimated energy consumption)

0-9999 kcal, 1 kcal increment

ELEVATION

0-12 %, 0,5 % increment

TIME

Exercise duration at 1 second intervals 00:00-99:59,

and at 1 minute intervals thereafter h1:40-h9:59

DISTANCE

0.00-99.99 km, 0,01 km increment

SpEED

Running deck speed (0,5-20 km/h / 0,3-12,5 mph

(T80) / 0,5-22 km/h / 0,3-14 mph (T85)), 0,1 km /

mph increment. A signal light indicates the selected

measurement unit (km/h, mph, pace = minutes/

kilometre).

GRApHIC / TEXT DISpLAY

T80 features a combined text and profile display

that provides instructions in English when you

switch to an exercise and during the exercise itself.

T85 is equipped with a separate graphic display for

detailed information on your workout profile, while

the text field provides instructions both when you

switch to an exercise and during the exercise itself.

ENTERING USER DETAILS

We recommend that you choose a user code and

save your personal details: these details are needed

e.g. for a more accurate estimation of your energy

consumption. At the same time, you can set the

units to be displayed and check the total training

values. Choosing a user code will also allow you to

save your exercise data.

1. Press SET. Use the arrow keys to select a user

code (1-4). Press ENTER to confirm your selection.

NOTE! The NO USER option displays device settings,

showing e.g. the total training time and distance.

2. Set the measurement units (Metric = metric

system, Imperial = avoirdupois). Use the arrow keys

to change the setting, and press ENTER to confirm

your selection. You will then move to the next

setting.

3. Set the user weight. Use the arrow keys to change

the setting, and press ENTER to confirm your

selection. This information is needed for estimating

energy consumption. You will then move to the next

setting.

4. Set gender (male, female). Use the arrow keys to

change the setting, and press ENTER to confirm your

selection. This information is needed for estimating

energy consumption. You will then move to the next

setting.

5. Set the age of the user. Use the arrow keys to

change the setting, and press ENTER to confirm your

selection. This information is needed for estimating

energy consumption. You will then move to the next

setting.

6. Set the audio signal (ON = signals on, OFF =

signals off). Use the arrow keys to change the

setting, and press ENTER to confirm your selection.

You will then move to the next setting. NOTE! In

profile workouts, the console gives an audio signal

in advance of any changes in profile.

7. Set the units to be displayed (km/h, min/km, mph,

min/mile). Use the arrow keys to change the setting,

and press ENTER to confirm your selection. You will

then move to the next setting. NOTE! You can set the

units during exercise: press SET once and use the

arrow keys to change the setting, and press ENTER

to confirm your selection.

8. Set the maximum speed for PSC and HRC

workouts with the arrow keys: since PSC and HRC

adjust the speed level according to your heart rate,

a maximum speed limit is needed to keep the speed

at a suitable level. The default is 12 km/h. Use the

arrow keys to change the setting, and press ENTER

to confirm your selection. You will then move to the

next setting.

9. The TOTAL TIME display shows a user specific total

training time on the treadmill. Press ENTER to move

to the next display.

10. The TOTAL DISTANCE display shows a user

specific total training distance on the treadmill.

Press ENTER to return to user settings or press START

to exit user settings.

Once you have set the user details, you can start

exercising by selecting your own user code. The

selected user code will remain in the console’s

memory until it is replaced with a new one, the

safety key is removed from its place, or the power

cord is unplugged.

pOSITION SpEED CONTROL (pSC)

Position Speed Control (PSC) allows you to adjust

running track speed by changing your position

on the track. Move to the front of the track and it

accelerates, and as you move back the track itself

slows down. When you are walking or running in the

middle section of the track the speed stays steady.

NOTE! You must wear a 5KHz Analog heart rate belt

when you use PSC! A blinking square in the Heart

Rate display indicates that heart rate measurement

is in operation.

NOTE! Attach the holder of the safety key carefully

to your shirt whenever you are using PSC. Adjust

the length of the safety key wire so that it will be

detached from the console, if you move too far back.

NOTE! If you are exercising with PSC, there must

not be another heart rate transmitter near the

treadmill (minimum distance 2 m); the simultaneous

1 2 3 4 5 6 7 8 9 10 11 12 ... 115 116

Comments to this Manuals

No comments

Tunturi T80 User Manual Page 7

Comments to this Manuals

Related products and manuals for Sports and recreation Tunturi T80